The Kar-Tech Micro Valve Driver packs flexible hydraulic control into a compact, rugged module. This fully configurable, current-regulated controller converts joystick, potentiometer or other input signals to precisely control one or two hydraulic valves.
Users can tailor input and output parameters through jumper settings, including minimums, maximums, ramps and output frequency. With up to two analog inputs and two proportional outputs, the Micro Valve Driver offers advanced configuration in a 3-inch-square footprint. An onboard Palm interface with RS-232 communication adds access to diagnostics, histograms, factory settings and file transfer for repeatable programming and fast troubleshooting.
The Micro Valve Driver features protected inputs capable of accepting machine-level voltages and safeguards against short circuits, reverse battery, overloads, transients and inductive surges. Its epoxy-potted enclosure adds another layer of protection against harsh operating conditions.
Kar-Tech Micro Valve Drivers put flexible inputs, configurable outputs and rugged reliability into a compact, easy-to-program platform. These drivers offer precise, repeatable performance, reduced setup time and simplified troubleshooting.
Multiple Configuration Options
Choose Universal, Micro, or Single- or Dual-Pot Box models to match application requirements.
Flexible Analog Inputs
Supports varied analog input configurations, including joystick, potentiometer and sensor inputs.
Current-Regulated Outputs
Smooth, proportional valve control with configurable current-regulated outputs compensate for coil resistance and supply voltage variations.
Fast, Simple Configuration
Adjust minimum and maximum outputs, ramp profiles and operating parameters with onboard controls or Kar-Tech’s programming interface.
Advanced Diagnostics
Integrated RS-232 communication supports diagnostics, configuration, file transfer and repeat programming.
Rugged Construction
Epoxy-potted electronics and protected inputs withstand vibration, moisture, electrical surges and tough operating environments.
Every Kar-Tech Valve Driver includes:
The Valve Driver is ideal for:
| Category | Specification | Details |
|---|---|---|
| Mechanical | Weight | 0.5 lb. |
| Protection | IP67 | |
| Operation Temperature | -40° to +85° C | |
| Storage Temperature | -55° to +100° C | |
| Housing Material | Epoxy-potted ABS enclosure | |
| Connections | 7 wires, 18 AWG GXL in a mesh loom | |
| Dimensions | 3.0" H x 3.8" W x 1.5" D | |
| Electrical | Communication | Serial: RS-232 |
| Supply Voltage | 9V-30VDC | |
| Analog Inputs | 2 (0-5V); 9V-30VDC and 100VDC transient protection; 10-bit resolution; on-board +5VDC regulated reference | |
| Standard Outputs | 2 proportional, current-controlled outputs; configurable as on/off or non-current-regulated proportional; PWM frequency adjustable from 20-500Hz | |
| Output Rating | 3 amp nominal, 5 amp max |
