Wireless VFD Remote Control
✓ Off the Shelf System
This simple VFD remote control adds wireless to your VFD speed control. Using a small, keyfob sized, but highly ruggedized transmitter, we give you control over direction, start/stop, and VFD speed. The VFD radio remote steps through ten speeds, latches the reverse output ON, and has a N/O output for start that is ON in start/run mode. The receiver runs off of 9 - 30VDC (and draws 26 - 34mA if you're powering the radio from the VFD supply), but you need a minimum of 12VDC to get the full 0 - 10V for the VFD speed controller. The transmitter for the wireless VFD system runs off of internal lithium batteries that recharge over micro USB, and the system provides a nominal 300' of range.
This kit is comprised of the following parts:
Wireless VFD Remote Transmitter
Five button MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge over a micro USB connection.
Programmable four output MICRO receiver (3A0914B), user-configurable (requires 4/8 button transmitter) as 1, 2, or 3 outputs in any combination of momentary or maintained outputs plus programmable “dump” output on the 4th output.