Customize 2 Joystick PACKER System

2 Joystick PACKER Transmitter

P/N: 3B2247D

PACKER series with two proportional (variable-speed) dual axis joysticks, a twist-to-release E-Stop switch, 3 pushbuttons, a three position keyswitch for engine control, 3 three position momentary and 1 three position maintained toggle switches

Transmitter

None

2 Joystick PACKER Transmitter + $2,190.00

Quantity

Your System

PWM Output Radio Receiver

P/N: 3B2564D

Programmable Legend radio receiver with 30 outputs; 12 Current regulated proportional and 18 PWM or on/off, and 3 feet of cables terminated with stripped ends. All outputs are sourcing and configurable for all joysticks, potentiometers, and switches. Receiver is designed with Wi-Fi enabled built in Gate for configuration and calibration using smart phones, tablets or computers. All electronics are encapsulated to protect against environment. Includes CANbus connector for tethered connection to the remote

Need a PWM Output Radio Receiver?

None

PWM Output Radio Receiver + $1,575.00

Quantity

Your System

Voltage Output Radio Receiver

P/N: 3B256QC

DUET radio receiver with 6 Analog outputs (0 to 90% of supply voltage) or ratiometric, 18 on/off or PWM, 6 current regulated proportional outputs and J1939 CANbus for all I/Os. All outputs are sourcing and configurable for all joysticks, potentiometers, and switches. Receiver is designed with Wi-Fi enabled built in Gate for configuration and calibration using smart phones, tablets or computers. All electronics are encapsulated to protect against environment. Includes CANbus connector for tethered connection to the remote

NOTE: This receiver comes with a harness and built-in Gate.

Need a VC-144 Radio Recevier for Voltage Ouput?

None

Voltage Output Radio Receiver + $1,575.00

Quantity

Your System

PLC LEGEND Receiver

P/N: 3C0106C

Revolutionize your mobile hydraulic systems with our PLC LEGEND radio receiver! The PLC LEGEND is a state-of-the-art radio receiver that can be programmed using the CoDeSys platform. We've built an entirely new feature set around our proven circuitry, making the PLC LEGEND the most versatile and user-friendly radio control system in the market.

With its 34 input/output pins, dual CAN, and a processor that runs at over 100MHz, the LEGEND offers enormous flexibility to run with many of our transmitters. Our CAN expansion port also allows for connection to additional PLC Legend and many of our sensors and linear actuators.

What's truly unique about the PLC LEGEND is that it's the first user-programmable radio control system in the mobile hydraulic market, giving you complete control over your system. You can program it using various methods like structured text, function block diagram, and ladder diagram. It's IEC 61131-3 compliant, making it a true wireless PLC.

The PLC LEGEND is fully sealed and can withstand severe-duty use in mobile hydraulic systems. It can function as a wireless receiver or a standalone hydraulic controller or I/O module for various applications.

Upgrade your hydraulic systems with Kar-Tech's PLC LEGEND, the most advanced and versatile radio receiver in the market. Get started with our free programming environment download and experience complete control over your system today!

Need a PLC Radio Recevier?

None

PLC LEGEND Receiver + $1,575.00

Quantity

Your System

PLC LEGEND Receiver 3ft pre-made mating harness

P/N: 011552A

3ft pre-made wiring harness with CAN for PLC Legend

PLC Legend Mating Harness

None

PLC LEGEND Receiver 3ft pre-made mating harness + $289.00

Quantity

Your System

CAN LEGEND Receiver

P/N: 3B256NB

LEGEND series radio receiver with all I/O via J1939. CAN mapping is configurable in the field. The radio provides up to 1,000' of range in a nominal installation. The receiver is designed with built in WiFi Gate for configuration and programing using smart phones, tablets or computers.

NOTE: This receiver comes with a harness and built-in Gate.

Need a Legend Radio Recevier?

None

CAN LEGEND Receiver + $1,010.00

Quantity

Your System

CODESYS Receiver

P/N: 3C0145A

Need a CODESYS Programmable Receiver?

None

CODESYS Receiver + $850.00

Quantity

Your System

Kar-Tech’s CODESYS system supports 18 configurable I/Os, providing flexible control options including PWM, current-regulated output, digital output, digital input, analog input, and frequency input modes. This versatility gives engineers the tools needed to develop precise and reliable control solutions. Using the industry-standard CODESYS IDE, engineers benefit from real-time diagnostics and debugging capabilities directly from the receiver.

The system features a fully integrated radio module with a programmable library, dual CAN bus capability with J1939 and CANopen support, and up to 1,500 persistent EEPROM variables that are retained through power cycles. All programming, debugging, and diagnostic functions can be performed completely wirelessly.

No more wrestling with serial cables and harnesses to implement software changes. Once development is complete, integrators and manufacturers can create and distribute boot applications to end users for simple field updates through the Wi-Fi gateway page. With the Kar-Tech CODESYS receiver, users can focus less on hardware limitations and more on developing innovative, precise control solutions.

GENERAL
Power supply voltage	9-30VDC with reverse battery protection
Standby Current (All outputs off)	<100 mA
Operating temperature	-40˚C to +85˚C
Storage temperature	-40˚C to +100˚C
Vibration	3G to 200Hz
Shock	100G
NEMA	4X

STANDARD CONFIGURATION with programmable I/O
Connectors	DTM04-12PA and DTM04-12PB24 and CAN 2, I/O: 18
Number of Pins	24
Analog Inputs (0 - 5 VDC)	18
Digital Inputs (9 to 30 VDC)	9
Frequency Inputs (1 Hz to 10 kHz)	2
Current Regulated Proportional Outputs	18
Pulse With Modulated Outputs	18
On/Off (Digital) Outputs	18
CAN Bus (CANopen or CAN J-1939)	2
Radio Frequency and Power	902-928 MHz 100 mW

CODESYS Receiver Wiring Harness

P/N: 3C0144A

Need CODESYS Receiver Wiring Harness?

None

CODESYS Receiver Wiring Harness + $350.00

Quantity

Your System

CAN Wall Charger

PN: B20072B

110V Wall charger for Kar-Tech remotes with five pin circular screw on style connector. Available with plugs for other countries - please email for more information.

Wall Charger?

None

CAN Wall Charger + $88.00

Quantity

Your System

CAN Car Charger

P/N: B20032C

Car Charger?

None

CAN Car Charger + $65.00

Quantity

Your System

High Gain 900 MHz Dome Antenna

P/N: 003-010-0905

Sealed High Gain 900 MHz Dome Antenna with 3 Feet of cable and M8 mounting hardware

None

High Gain 900 MHz Dome Antenna + $59.00

Quantity

Your System

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

* Required Fields

Your Customization

2 Joystick PACKER System

In stock

$59.00

Qty

Summary

Skip to the end of the images gallery

Skip to the beginning of the images gallery

2 Joystick PACKER System

P/N

3B2247

Variable Pricing

✓ Off the Shelf System

A highly flexible, bellypack radio remote control for many types of proportionally controlled hydraulic equipment. This system will work with nearly any valves or electrohydraulic control system and includes CAN J1939 for all the I/Os. It provides extra switches for auxiliary functions.