8 Button 2.4 GHz CANbus MACRO System
âś“ Off the Shelf System
The MACRO radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a highimpact rated glass-filled nylon material. Unless otherwise specified below, all MACRO series controls come with a green LED for transmit status and a red LED for battery status and error codes and are powered off of internal rechargeable lithium-polymer batteries. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, etc.
The 2.4GHz MINI series radio receiver is a compact, urethane-potted module that receives commands from the MACRO transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 600’ line of sight (nominal) wireless range.
This kit is comprised of the following parts:
8 Button 2.4 GHz MACRO Transmitter
Programmable 10-output urethane-potted radio receiver with J1939 onboard
The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.
Note:
The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.
Height
Transmitter: 4.70" / Receiver: 2.50"
Weight
1.600000
Width
Transmitter: 2.59" / Receiver: 2.50"
Depth
Transmitter: .90" / Receiver: 1.00"
Transmitter Buttons
9
Receiver Power
9 VDC – 30 VDC
Receiver Outputs
10 solid-state on/off; 5 Amps maximum each; protected
Display
N/A
LEDs
2
Battery Type
Lithium Polymer
Battery Life
40 hours between charge
Charging
Micro USB
Frequency
2.4GHz DSSS
Range
Up to 600' Nominal
Housing Material
Glass-Filled Nylon
Validate your login