3 Button 2.4GHz Magnetic MICRO System
✓ Off the Shelf System
The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.
* System is supplied pre-configured as three momentary outputs. Note: Programming is not available using the three button transmitter - however this receiver can be programmed using another MICRO transmitter.
This kit is comprised of the following parts:
3 Button 2.4GHz Magnetic MICRO Transmitter
3A564NA
Replacement/spare 2 button magnetic 2.4GHz MICRO transmitter.
6 Output 2.4GHz Receiver
3A564DA
This programmable six-output 2.4GHz receiver serves as a replacement for many of our small handheld systems. It is user-configurable up to 4 outputs in any combination of momentary or maintained outputs plus programmable “dump” and E-Stop outputs.
The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.
Note:
The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.
Height
Transmitter: 2.80" / Receiver: 2.50"
Weight
0.774800
Width
Transmitter: 1.75" / Receiver: 2.50"
Depth
Transmitter: .60" / Receiver: 1.00"
Transmitter Buttons
4
Receiver Power
9 VDC – 30 VDC
Receiver Outputs
6 solid-state on/off; 5 Amps maximum each; protected
Display
N/A
LEDs
2
Battery Type
Lithium Polymer
Battery Life
40 hours between charge
Charging
Magnetic Charging Pad
Frequency
2.4GHz DSSS
Range
Up to 600' Nominal
Housing Material
Glass-Filled Nylon
Validate your login