Single Potentiometer Valve Driver
✓ Off the Shelf System
Our single pot valve driver is a simple all-in-one control box for a proportional hydraulic valve. A power switch on the front controls master power, and turning the dial will increase the speed to your valve. All characteristics of the valve can be changed (and this box will run nearly any valve) - both min and max current, ramp times, and dither frequency. The enclosure is urethane-potted for extreme weather, vibration, and shock resistance, and comes with 3' of cable with which to make external connections - as easy as power, ground, and coil connections. A front panel-mounted LED gives status of the valve's output for quick visual feedback.
Weight
0.910000
Height
3.50"
Width
5.50"
Depth
2.40"
Communication
RS-232
Supply Voltage
9V to 30VDC
Analog Inputs
Two 4–20mA inputs
Standard Outputs
1 proportional, current regulated output to adjust for variation in coil resistance or input voltage.
Output Rating
3 amp nominal, 5 amp max.
Housing Material
Nylon 6/6 black
Connector
4 wires, 18 AWG GXL in a flame retardent mesh loom.
Protection Types
Urethane-potted enclosure
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +100°C
Validate your login