-
+

4 Button 2.4 GHz Magnetic CANbus MACRO System

P/N
3A415FA
$449.98

✓ Off the Shelf System

The MACRO radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a highimpact rated glass-filled nylon material. Unless otherwise specified below, all MACRO series controls come with a green LED for transmit status and a red LED for battery status and error codes and are powered off of internal AAA alkaline batteries. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, etc.

The 2.4GHz MINI series radio receiver is a compact, urethane-potted module that receives commands from the MACRO transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 600’ line of sight (nominal) wireless range.

This kit is comprised of the following parts:

Programmable 4-button magnetic MACRO radio transmitter.

6 Output CANbus 2.4GHz Receiver

Programmable 6-output & CANbus urethane-potted radio receiver.

The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.

Note:

The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.

Technical Information

Height

Transmitter: 4.70" / Receiver: 2.50"

Weight

1.600000

Width

Transmitter: 2.59" / Receiver: 2.50"

Depth

Transmitter: .90" / Receiver: 1.00"

Transmitter Buttons

5

Receiver Power

9 VDC – 30 VDC

Receiver Outputs

6 solid-state on/off; 5 Amps maximum each; protected

Display

N/A

LEDs

2

Battery Type

Lithium Polymer

Battery Life

40 hours between charge

Charging

Magnetic Charging Pad

Frequency

2.4GHz DSSS

Range

Up to 600' Nominal

Housing Material

Glass-Filled Nylon