4 Button 2.4 GHz AAA MACRO System

In stock

✓ Off the Shelf System

The MACRO radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a highimpact rated glass-filled nylon material. Unless otherwise specified below, all MACRO series controls come with a green LED for transmit status and a red LED for battery status and error codes and are powered off of internal AAA alkaline batteries. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, etc.

The 2.4GHz MINI series radio receiver is a compact, urethane-potted module that receives commands from the MACRO transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 600’ line of sight (nominal) wireless range.



This kit is comprised of the following parts:

4 Button 2.4 GHz MACRO Transmitter - AAA Batteries

Programmable 4-button AAA battery MACRO radio transmitter

6 Output 2.4GHz Receiver

Programmable 6-output urethane-potted radio receiver.

Technical Info

More Information
Height Transmitter: 4.70" / Receiver: 2.50" Weight 1.600000 Width Transmitter: 2.59" / Receiver: 2.50"
Depth Transmitter: .90" / Receiver: 1.00" Transmitter Buttons 5 Receiver Power 9 VDC – 30 VDC
Receiver Outputs 6 solid-state on/off; 5 Amps maximum each; protected Display N/A LEDs 2
Battery Type Alkaline - AAA Battery Life 40 hours between charge Charging Alkaline - AAA
Frequency 2.4GHz DSSS Range Up to 600' Nominal Housing Material Glass-Filled Nylon