8 Button 2.4 GHz MACRO System


✓ Off the Shelf System

The MACRO radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a highimpact rated glass-filled nylon material. Unless otherwise specified below, all MACRO series controls come with a green LED for transmit status and a red LED for battery status and error codes and are powered off of internal rechargeable lithium-polymer batteries. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, etc.

The 2.4GHz MINI series radio receiver is a compact, urethane-potted module that receives commands from the MACRO transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 600’ line of sight (nominal) wireless range.



This kit is comprised of the following parts:

8 Button 2.4 GHz MACRO Transmitter

Programmable 8-button MACRO radio transmitter

10 Output 2.4GHz Receiver

Programmable 10-output urethane-potted radio receiver.

Technical Info

More Information
Height Transmitter: 4.70" / Receiver: 2.50" Weight 1.600000 Width Transmitter: 2.59" / Receiver: 2.50"
Depth Transmitter: .90" / Receiver: 1.00" Transmitter Buttons 9 Receiver Power 9 VDC – 30 VDC
Receiver Outputs 10 solid-state on/off; 5 Amps maximum each; protected Display N/A LEDs 2
Battery Type Lithium Polymer Battery Life 40 hours between charge Charging Micro USB
Frequency 2.4GHz DSSS Range Up to 600' Nominal Housing Material Glass-Filled Nylon