Programmable 6 Button MACRO System
✓ Off the Shelf System
The MACRO radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a high impact rated glass-filled nylon material. Unless otherwise specified below, all MACRO series controls come with a green LED for transmit status and a red LED for battery status and error codes and are powered off of internal rechargeable lithium-polymer batteries. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, etc.
The MINI series radio receiver is a compact, urethane-potted module that receives commands from the MACRO transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 300’ line of sight (nominal) wireless range.
This kit is comprised of the following parts:
Height
Transmitter: 4.70" / Receiver: 2.50"
Weight
1.600000
Width
Transmitter: 2.59" / Receiver: 2.50"
Depth
Transmitter: 1.0625" / Receiver: 1.00"
Transmitter Buttons
7
Receiver Power
9 VDC – 30 VDC
Receiver Outputs
8 solid-state on/off; 5 Amps maximum each; protected
Display
N/A
LEDs
2
Battery Type
Lithium Polymer
Battery Life
40 hours between charge
Charging
Replacement
Frequency
900MHz FHSS
Range
Up to 300' Nominal
Housing Material
Glass-Filled Nylon
Validate your login