20 Button 2.4 GHz MEGA System
✓ Off the Shelf System
The 20 button MEGA radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a high impact rated glass-filled nylon material. Unless otherwise specified below, all MEGA series controls come with a green LED for transmit status and a red LED for battery status. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, and CAN J1939 output. CAN output is useful for connecting to many CAN controllers for additional logic programing.
The 2.4GHz radio receiver is a compact, urethane-potted module that receives commands from the MEGA transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 1000’ line of sight (nominal) wireless range.
This kit is comprised of the following parts:
3A5695A
Programmable 22 outputs 2.4 GHz Receiver
All wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary. Custom decals available upon request.
Note:
All wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary. Custom decals available upon request.
Height
Transmitter: 6.17" Receiver: 2.04”
Weight
3.500000
Width
Transmitter: 3.15" Receiver: 3.37”
Depth
Transmitter: 1.44" Receiver: 4.60”
Transmitter Buttons
21 (20 + Power)
Receiver Power
9 VDC – 30 VDC
Receiver Outputs
22 solid-state on/off; 5 Amps maximum each; protected + CAN
LEDs
2
Battery Type
Lithium
Battery Life
80 hours between charge
Frequency
2.4 GHz
Range
1,000 ft
Housing Material
Glass-Filled Nylon
Validate your login