3 Button MICRO System

In stock

✓ Off the Shelf System

The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.

* System is supplied pre-configured as three momentary outputs. “Dump” or E-Stop functionality is always on the 4th output, and can only be used with up to three normal outputs. Note: Programming is not available using the two button transmitter - however this receiver can be programmed using another MICRO transmitter.


This kit is comprised of the following parts:

3 Button MICRO Transmitter

Three button MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge over a micro USB connection.

4 Output MINI Receiver

Programmable four output MICRO receiver (3A0914B), user-configurable (requires 4/8 button transmitter) as 1, 2, or 3 outputs in any combination of momentary or maintained outputs plus programmable “dump” output on the 4th output.

Technical Info

More Information
Height Transmitter: 2.80" / Receiver: 2.50" Weight 1.000000 Width Transmitter: 1.75" / Receiver: 2.50"
Depth Transmitter: .60" / Receiver: 1.00" Transmitter Buttons 4 Receiver Power 9 VDC – 30 VDC
Receiver Outputs 4 solid-state on/off; 5 Amps maximum each; protected Display N/A LEDs 2
Battery Type Lithium Polymer Battery Life 40 hours between charge Charging Micro USB
Frequency 900MHz FHSS Range Up to 300' Nominal Housing Material Glass-Filled Nylon