-
+

3 Button 2.4GHz CANbus MICRO System

P/N
3A414BA
$324.99

✓ Off the Shelf System

The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.

* System is supplied pre-configured as three momentary outputs. Note: Programming is not available using the three button transmitter - however this receiver can be programmed using another MICRO transmitter.

This kit is comprised of the following parts:

3 Button 2.4GHz MICRO Transmitter

Three button MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge over a micro USB connection.

6 Output CANbus 2.4GHz Receiver

Three button MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge over a micro USB connection.

Technical Information

Height

Transmitter: 2.80" / Receiver: 2.50"

Weight

0.774800

Width

Transmitter: 1.75" / Receiver: 2.50"

Depth

Transmitter: .60" / Receiver: 1.00"

Transmitter Buttons

4

Receiver Power

9 VDC – 30 VDC

Receiver Outputs

6 solid-state on/off; 5 Amps maximum each; protected

Display

N/A

LEDs

2

Battery Type

Lithium Polymer

Battery Life

40 hours between charge

Charging

Micro USB

Frequency

2.4GHz DSSS

Range

Up to 600' Nominal

Housing Material

Glass-Filled Nylon