3 Button 2.4GHz Magnetic CANbus MICRO System
✓ Off the Shelf System
The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.
* System is supplied pre-configured as three momentary outputs. Note: Programming is not available using the three button transmitter - however this receiver can be programmed using another MICRO transmitter.
This kit is comprised of the following parts:
3 Button 2.4GHz Magnetic MICRO Transmitter
Three button MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge on a magnetic charging pad.
Transmitter: 2.80" / Receiver: 2.50"
Transmitter: 1.75" / Receiver: 2.50"
Transmitter: .60" / Receiver: 1.00"
9 VDC – 30 VDC
6 solid-state on/off; 5 Amps maximum each; protected
40 hours between charge
Magnetic Charging Pad
Up to 600' Nominal