3 Button 2.4GHz MICRO System

P/N
3A414KA
$309.99
In stock

✓ Off the Shelf System

The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.

* System is supplied pre-configured as three momentary outputs. Note: Programming is not available using the three button transmitter - however this receiver can be programmed using another MICRO transmitter.

-
+

This kit is comprised of the following parts:

3 Button 2.4GHz MICRO Transmitter

Replacement/spare 2 button 2.4GHz MICRO transmitter to mate with receiver P/N: 3A414DA, as sold in kit 3A414KA.

6 Output 2.4GHz Receiver

This programmable six-output 2.4GHz receiver serves as a replacement for many of our small handheld systems. It is user-configurable up to 4 outputs in any combination of momentary or maintained outputs plus programmable “dump” and E-Stop outputs.

Technical Info

More Information
Height Transmitter: 2.80" / Receiver: 2.50" Weight 0.774800 Width Transmitter: 1.75" / Receiver: 2.50"
Depth Transmitter: .60" / Receiver: 1.00" Transmitter Buttons 4 Receiver Power 9 VDC – 30 VDC
Receiver Outputs 6 solid-state on/off; 5 Amps maximum each; protected Display N/A LEDs 2
Battery Type Lithium Polymer Battery Life 40 hours between charge Charging Micro USB
Frequency 2.4GHz DSSS Range Up to 600' Nominal Housing Material Glass-Filled Nylon