Features
Communication
Serial, CANbus via SAE-J1939, RF: 900mhz or 2.4GHz
Analog Inputs
Up to 10 analog inputs(0-5v or 4-20mA)
Standard Outputs
Configurable to drive up to 4 motors bidirectionally. Outputs can be bridged to drive higher currency loads, or can be configured as standard current regulated outputs for hydraulic values.
Operation Temperature
-40° to +85° C
Protection
IP67
Connections
Made by AXL wire, AWA varies with application & current requirements
Weight | 3.400000 | Height | 7.87" | Width | 7.25" |
---|---|---|---|---|---|
Depth | 1" | Communication | CAN J1939, RS-232, WiFi, RF 900MHZ, RF 2.4GHz | Supply Voltage | 9V to 30VDC - Reverse Polarity Protected |
Analog Inputs | 8 Maximum, 0-Supply Voltage (12/24VDC), 12-bit resolution with on-board +5VDC regulated analog reference for sensors. Inputs are protected for overvoltage/transient spikes. | Standard Outputs | Up to 8 bi-directional proportional. | Output Rating | Up to 30A continious per channel |
Housing Material | Anodized aluminum for heat dissipation | Connector | Depends on current load - determined at design time | Protection Types | Urathane-potted enclosure |
Operating Temperature | -40°C to +85°C | Storage Temperature | -55°C to +100°C | Data Sheet | Motor_Driver.pdf |