3 Button 2.4GHz Magnetic MICRO System

P/N
3A414VA
$318.99
In stock

✓ Off the Shelf System

The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.

 

* System is supplied pre-configured as three momentary outputs. Note: Programming is not available using the three button transmitter - however this receiver can be programmed using another MICRO transmitter.

-
+

This kit is comprised of the following parts:

3 Button 2.4GHz Magnetic MICRO Transmitter

3A414NA

Replacement/spare 2 button magnetic 2.4GHz MICRO transmitter.

6 Output 2.4GHz Receiver

3A414DA

This programmable six-output 2.4GHz receiver serves as a replacement for many of our small handheld systems. It is user-configurable up to 4 outputs in any combination of momentary or maintained outputs plus programmable “dump” and E-Stop outputs.

Note:

The system will ship with full manual and installation drawings. Additionally, all wireless transmitter and receiver pairs ship ID’ed together with all outputs factory preset as momentary.

Technical Info

More Information
Height Transmitter: 2.80" / Receiver: 2.50" Weight 0.774800 Width Transmitter: 1.75" / Receiver: 2.50"
Depth Transmitter: .60" / Receiver: 1.00" Transmitter Buttons 4 Receiver Power 9 VDC – 30 VDC
Receiver Outputs 6 solid-state on/off; 5 Amps maximum each; protected Display N/A LEDs 2
Battery Type Lithium Polymer Battery Life 40 hours between charge Charging Magnetic Charging Pad
Frequency 2.4GHz DSSS Range Up to 600' Nominal Housing Material Glass-Filled Nylon
Data Sheet Printable MICRO Data Sheet