3 Button 2.4GHz Magnetic CANbus MICRO System

P/N
3A414RA
$333.99
In stock

✓ Off the Shelf System

The MICRO controls are supplied as a matched pair system - transmitter and receiver, with spare transmitters available. The MICRO system will be supplied as a programmable version so that the user can select the number of outputs, whether each output is momentary or maintained, an E-Stop mode, and an optional “dump” output - this can be set to turn on every time any (selectable) function is activated at the transmitter, or stay on as long as the transmitter is on.

* System is supplied pre-configured as three momentary outputs. Note: Programming is not available using the three button transmitter - however this receiver can be programmed using another MICRO transmitter.

Overview
-
+

This kit is comprised of the following parts:

3 Button 2.4GHz Magnetic MICRO Transmitter

Three button MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge on a magnetic charging pad.

6 Output CANbus 2.4GHz Receiver

Programmable six output CANbus enabled MICRO receiver (3A4145A), user-configurable (requires 4/8 button transmitter) as 1, 2, or 3 outputs in any combination of momentary or maintained outputs plus programmable “dump” and E-Stop outputs.

Technical Info

More Information
Height Transmitter: 2.80" / Receiver: 2.50" Weight 0.774800 Width Transmitter: 1.75" / Receiver: 2.50"
Depth Transmitter: .60" / Receiver: 1.00" Transmitter Buttons 4 Receiver Power 9 VDC – 30 VDC
Receiver Outputs 6 solid-state on/off; 5 Amps maximum each; protected Display N/A LEDs 2
Battery Type Lithium Polymer Battery Life 40 hours between charge Charging Magnetic Charging Pad
Frequency 2.4GHz DSSS Range Up to 600' Nominal Housing Material Glass-Filled Nylon