4 Button 2.4 GHz AAA MACRO System
✓ Off the Shelf System
The MACRO radio transmitter is an extremely rugged, ergonomic handheld wireless control molded out of a highimpact rated glass-filled nylon material. Unless otherwise specified below, all MACRO series controls come with a green LED for transmit status and a red LED for battery status and error codes and are powered off of internal AAA alkaline batteries. This system is fully programmable, allowing you to set each button as momentary or maintained action, assigning complementary dump valve/pump outputs, variable sleep times, E-Stop modes, cloning transmitters, etc.
The 2.4GHz MINI series radio receiver is a compact, urethane-potted module that receives commands from the MACRO transmitter quoted above. It has full two-way communication built in, and is designed to reject interference and crosstalk, while providing a 600’ line of sight (nominal) wireless range.
This kit is comprised of the following parts:
Height
Transmitter: 4.70" / Receiver: 2.50"
Weight
1.600000
Width
Transmitter: 2.59" / Receiver: 2.50"
Depth
Transmitter: .90" / Receiver: 1.00"
Transmitter Buttons
5
Receiver Power
9 VDC – 30 VDC
Receiver Outputs
6 solid-state on/off; 5 Amps maximum each; protected
Display
N/A
LEDs
2
Battery Type
Alkaline - AAA
Battery Life
40 hours between charge
Charging
Alkaline - AAA
Frequency
2.4GHz DSSS
Range
Up to 600' Nominal
Housing Material
Glass-Filled Nylon
Validate your login