Remote VFD Radio Control - 2.4GHz/CE

P/N

3A5111C

$397.50

✓ Off the Shelf System

This VFD remote control adds wireless VFD speed control to your plant. Using a small, keyfob sized, but highly ruggedized radio transmitter, we give you control over direction, start/stop, and remote VFD speed. The VFD wireless controller steps through speed control - and you have control of how many steps and how quickly and has configurable start/run and direction control. Topping it off - you have full control over builtin Wi-Fi to configure your VFD remote from your cellphone. The minimum and maximum output voltage as well as number of steps from minimum to maximum, the acceleration time, and on/off outputs can be configured as laching or momentary using the built in Wi-Fi and your smart device.

The receiver runs off of 9 - 30VDC (and draws 26 - 34mA if you're powering the radio from the VFD supply), but you need a minimum of 12VDC to get the full 0 - 10V for the VFD speed controller. The transmitter for the wireless VFD system runs off of internal lithium batteries that recharge over micro-USB, and the system provides a nominal 300 - 600' of range.

This kit is comprised of the following parts:

Wireless 2.4 VFD Remote Transmitter

Five button 2.4 MICRO transmitter, pre-synchronized to the receiver, including internal rechargeable lithium polymer batteries that charge over a micro USB connection.

3A5113C

Programmable VFD receiver with three programmable outputs via Internal WIFI, one adjustable analog 0 to 10VDC for motor speed control and two on/off outputs for motor start/stop and motor forward reverse.