38 Output Radio Receiver

38 Output Radio Receiver is available to buy in increments of 1
P/N
3A4053A
$799.00
In stock

3A4053A

Our DUET is our new state of the art radio receiver. We’ve taken the core circuitry that we’ve proven in the field day after day for nearly twenty years, and built an entirely new feature-set around it: 35 input/output pins that can be configured in many different ways, dual CAN (normally via J1939), a processor that runs at over 100MHz, loads of memory (and a real-time clock) for datalogging, huge flexibility to run nearly any of our RF modules, and an expansion port for connection to some really neat bleeding-edge technologies only available to our OEM partners. The enclosure itself is fully sealed, and we can further encapsulate or conformally coat the internal electronics for severe duty use in mobile hydraulic off-highway systems. There are several display options available at the receiver, along with a control surface if desired for redundant/backup operation. Like all of our radio receivers, the DUET can be used either as a wireless receiver or as a standalone hydraulic controller or IO module for any number of different applications. Multiple connector and cabling options exist to match your application requirements. We have several announcements to follow on the DUET’s advanced capabilities to our OEM and distribution partners – make sure you’re signed up for our newsletter to keep up with how Kar-Tech is defining the state of the art in mobile control systems!
-
+
We found other products you might like!

Technical Info

More Information
Weight 4.200000 Height 5.50" Width 5.625"
Depth 2.00" Ingress Protection IP67 Operating Temperature -40° to +85° C
Housing Material High Temperature Nylon Storage Temperature -55° to +85° C Certification FCC, IC, C-Tick, Others on Request
Protocols RS-232, CANbus (2x): SAE-J1939, RF: 900MHz FHSS or 2.4GHZ DSSS, Wi-Fi Supply Voltage 12V/24V nominal (9V – 30VDC) Analog Inputs 20 Maximum, 0-32VDC (other ranges available), 12-bit resolution with on-board 5V Reference supply available for sensors. Inputs are protected from overvoltage & transient spikes.
Digital Inputs 27 Maximum — 12/24V nominal input range with protection for overvoltage/transient spike Frequency Inputs 2 Maximum — 12/24V nominal input range with protection for overvoltage/transient spike Quadrature Inputs 1 Maximum — 12/24V nominal input range with protection for overvoltage/transient spike
PWM Outputs 13 Maximum (12 current regulated, 1 non-current regulated) 5A max, sourcing Digital Outputs 20 Maximum Variable Voltage Outputs 12 Maximum, 0-30V (other ranges available)
**NOTE: INPUTS & OUTPUTS SHOW MAXIMUMS ONLY. Using all the inputs or outputs of one type may limit other I/O. Please contact us for no-charge application support. Frequency 900MHz FHSS, 2.4GHz DSSS. With powers up to 100mW Operating Range 300ft, 1,000ft or 2,500ft (nominal)